How Much Does Appliance Repair Cost?

Learn the standard price of hiring professional appliance repair from Tate Appliance Repair:

A kitchen is full of large electrical appliances. An electrical stove, dishwasher or refrigerator requires the right wires. In the event an appliance is improperly installed, it poses a real chance of causing a fire. To guarantee your electrical appliances are in good order, it is important to enlist a certified service for appliance repair.

DIY electrical service for appliances is not a recommended idea. There are a handful small repairs where DIY is be a consideration. In those times, just be sure to use the right tools and to always shut off the power source.

Troubleshooting or installing large appliances, however, is more complicated. You should not try DIY repair. Your stove, for example, will need either a 250- or 125-volt circuit dependent on if it’s gas-powered or electrical, and you’ll need no less than two 20-amp, 125-volt circuits to run small types of household appliances. These types of circuits can each carry multiple electrical outlets, but don’t overload them — which will mean, a third outlet is required.

The chance of a short (which could cause major injury or even death) during any type of bigger job usually isn’t worth it. Instead call a professional service in CITY, STATE.

You can do a search for appliance repair services in CITY on on social media. Look for businesses with several reviews. Or ask for a referral from a coworker if you are having issues with a stove, dishwasher or refrigerator.

Hiring professional appliance repair companies begins with contacting a contractor in CITY that has experience in repair of kitchen appliances. Some services are appliance-specific, and won’t provide repair for all kinds of appliances.

The reason several appliance repair companies aren’t qualified to repair a kitchen appliance is because of all of the electrical appliances in a kitchen that require water to run. Most refrigerators require water to make ice in the freezer and dishwashers require water to operate. Water is very dangerous when performing electrical repairs.

If electrical repairs are not done properly and waterlines rupture, just one example, there’s a real chance of electrocution. Electricity and water don’t mix.

That’s why you need a CITY contractor who is able to handle both.

Certified appliance repairmen can charge in the neighborhood of $50 to $75 an hour for repairs, and individual contractors may charge around $70 and $115 per hour. This could seem like a lot, that’s because it is better to pay a more expensive price for excellent work. If a repair company charges less than $35 an hour, you should be suspicious.

It’s important to be sure the appliance repairman is in possession of a permit from CITY for any type of electrical work. Some unqualified repairmen will argue that they do not require a permit, but don’t trust it. Always check with CITY officials.

Most local companies in CITY will charge a small cost for their trip, from $45 to $75. You will have to pay the total price regardless of if the repair is done, so it’s smart to have a small list available of appliances for the company to troubleshoot.

The average is $130 for dishwasher repairs – services in CITY will often charge $75 to $125 per hour. Expect a $60 to $85 trip fee too for the repairman to travel and inspect the problem.

The cost of new kitchen appliances range between $350 and $7,500. The broad range depends the type of appliance, such as a high-price refrigerator compared to a low-cost oven.

Troubleshooting or upgrading an electrical appliance is one of the most difficult repair projects you can complete in a kitchen.

One way to sidestep these types of electrical issues is listening closely to a technician when he provides an estimate for repair. Exact types of wire should be used depending on the appliance, and the colors of wires (for ground or neutral) may are different when local laws or requirements are renewed.

In addition, a lot of jurisdictions demand arc fault protection for kitchen electrical circuits in addition to ground fault circuit interruption (GFCI) protection. If the technician fails to mention this, or suggests that you do not really “need” them, it’s time to call a different repairman.

In addition, be sure to watch a technician attentively when he completes the evaluation of the oven. If it’s a new kitchen appliance the repairman is installing, question if it is able to use the exact same circuit or if it needs an enhancement since there are noticeable size and electrical power usage differences in newer models. The same can be applied to dishwashers and ovens.

professionals should be willing to convey what they are going to do, why it is important and articulate each part of the price, which likely includes appliance parts, labor and sometimes miscellaneous. Some appliance repair services willing to wave the travel fee if repair is done.


Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts